Even after routine use, TV remote controls frequently stop functioning. That is as a result of the poor construction of TV remote controls! Wondering how to solve LG TV remote not working? You have come to the right place.

Try every single one of the fixes I’ve listed below before you start searching for a replacement remote.

I can assure you that the majority of you will be able to easily reactivate your remote access!

LG TV Remote Not Working: How to Solve

Try below ways if your LG TV remote does not work.

Replace the Batteries

Replace the batteries in your remote control as soon as it stops functioning.

The functionality of the remote can typically be impacted by dead batteries.

Make sure to install the new batteries correctly when you are replacing the old ones.

In addition, give the remote some time to charge after adding fresh batteries.

Perform a Power Cycle on the Remote

If replacing the batteries does not work, you can perform a power cycle on the remote.

Any electrical hiccups and interferences that might be impairing the remote’s functionality will be eliminated as a result.

To perform a power cycle on your remote, follow these steps:

• The remote’s batteries should be taken out.
• Wait two to three minutes.
• Reinstall the remote’s batteries.
• Hold off for a while.
• Switch the channel or volume up on the TV after turning it on.

Note that, when you press a button on the remote, the light on the top should blink.

Perform a Power Cycle on the TV

A problem with your TV could also be the cause of a non-responsive remote.

The remote control may not be operating properly due to a software bug or some other interference.

By running your TV through a power cycle, you can usually fix this. Follow these steps:

• Turn the TV off.
• Shut off the device’s power supply.
• Hold off for a few seconds or minutes.
• Reconnect the electrical cord to the outlet.
• Wait a few minutes.
• Turn the TV on.

Go on to the next step if this doesn’t resolve the problem.

Also Read: How to Restart LG TV?

Update the TV

Several problems can arise from outdated system software. One of them is a non-functioning remote.

There is a possibility that your LG TV won’t update automatically if it is an older model.

You must access the settings in order to manually update the TV.

You might be wondering how you would be able to do that without a remote. Thankfully, there are a few methods for getting to LG TV settings without a remote.

Go to system information in the settings tab and check for updates there. Install any pending updates if there are any.

Remove Any Obstacles That Might Cause Interference

Many times, people use the remote without taking into account any obstructions.

There could be objects blocking the TV or the remote control, or you could be trying to operate it from behind the couch.

There is a sensor on the TV that picks up the IR signal when you press a button on the remote. Usually, the bottom of the TV is where this sensor is found.

There is a high likelihood that the TV won’t be able to receive the signal if something is blocking the IR blaster on the remote or the sensor receiver on the TV.

Therefore, check for interferences before concluding that your remote is broken.

Re-register the Remote

There might be a problem with how the remote communicates with the TV if you use the LG magic remote with it.

By re-registering the remote, this problem can be quickly fixed.

Follow these steps:

• Up until the red lights begin blinking, simultaneously press the home and back buttons. Performing this will deregister the remote.
• In order to point the mouse at the TV, press the mouse pointer key (or the scroll wheel).
• Your TV will display a pop-up letting you know that the remote has been registered.

Try Using a Universal Remote

In order to determine whether the issue is with the TV or the remote, try using a universal remote if the problem persists.

You can download the LG ThinQ app and pair it with your TV if you don’t have a universal remote control.

The Android TV Remote and Universal TV remote are just a couple of the additional third-party remote apps that you can download from the Play Store.

Contact Support

You might need to contact LG customer support if the solutions suggested in this article did not resolve the problem for you.

Final Words: LG TV Remote Not Working

Remote issues are fairly typical, and the majority of the time, the fixes are also quite straightforward.

An obstruction or other interference is frequently to blame for a remote control not working.

Since remotes use IR blasters to send signals to the TV, they operate optimally in a range.

Most remote controls have a 10-meter range; if they are used outside of this, they cannot properly send signals to the TV.

Therefore, bear this in mind as you operate the remote.