How to Connect AirPods If Case is Dead? Updated Guide
Have you ever had an AirPod case with no power? Or do you worry about what to do in the event that it does occur? We have your back.
Do you know how to connect AirPods if case is dead? Only if you previously charged the Airpods or connected them to your device is this possibility. However, connecting the pods on a new phone is not possible unless you charge the case.
How to properly handle dead AirPod cases will be covered in this article.
How Do I Connect My Airpods When the Case is Dead?
- Activate the home screen on your iPhone.
- Keep the Airpods in the case or as close to your iPhone as you can.
- Click the “Connect” Button
- Once you’ve clicked the “Connect” button, the rest of the process is simple. You will receive step-by-step instructions throughout the installation. If you’re using the Airpods pro, make sure Siri is activated on your iPhone.
- The notification “DONE” will appear on your screen after completing the process.
- Your Airpods will be configured on the supporting device without your intervention if you have an iCloud account.
Read More: How to Connect AirPods to HP Laptop?
How to Connect AirPods Without Case?
Try out this method if you’ve earlier paired your Airpods to your iPhone device and you want to reconnect without making use of the Airpod case;
- To access the Control Center, swipe downward from the top right corner of the screen.
- The audio card is located in the upper right corner of the Control Center.
- If you want to share it while it’s in full-screen mode, please tap the AirPlay icon.
- Select AirPods from the list of Bluetooth devices to complete the process.
- The AirPods will then establish a connection with your iPhone, enabling immediate use. But if you can’t see the AirPods, it means that either the battery is low or you haven’t connected them yet.
Why Do I Need a Case?
You can’t charge your AirPods if you don’t have a case. Your case serves as a holder for your AirPods when they need to charge.
They protect your AirPods as well. Consequently, it’s critical to look after the AirPods case. Read ‘how to put an How to turn your AirPods case on and off properly will help it last longer.
In order to restore your AirPods to their factory settings, you must have the case. The AirPods case is required to charge the device, so if you lose it, you will need to either borrow another one or buy a new one.
When you match your phone case and your AirPods case, they look fantastic. With the added benefit of protection, it is extremely fashionable.
Why Did My AirPods Case Die?
Your case may have died because you simply neglected to charge it or because your case battery has a problem.
The battery life of Lithium-ion batteries will eventually deteriorate, so you won’t get the same amount of power time as before.
The case of the AirPods could last for about five days if the earpieces and case are both fully charged.
The AirPods won’t turn off when you put them back in the case if the AirPods case is completely dead. Even when the case is inside and the lid is closed, they simply stay on. Once the case is at 0%, the earpieces will begin to discharge.
Check the batteries in your AirPods if they’re not working, and if that doesn’t fix it, you might try cleaning them.
How Do I Reconnect AirPods to the Charging Case?
Go to Settings on your phone to reconnect. Look for the Bluetooth icon, then select the AirPods information button that is located next to it. To restart the connection from scratch, click forget the device after that.
Open the lid of the case while keeping both AirPods inside and watch for the amber status lights to begin flashing. For a few seconds, press and hold the setup button on the case’s back.
Move the case next to your phone and open it once the status light starts to flash white. You should now be able to see your AirPods on Bluetooth-enabled devices.
A restart of the case might be required if the light does not change color.
For 10 to 15 seconds, press and hold the setup button. The status light will flash amber a few times while the button is being held down before turning white.
Tips to Keep in Mind If the Airpod Case is Not Connecting
If the AirPod case is not connecting, keep the following advice in mind.
- AirPod’s software may have recently been updated.
- Verify that Bluetooth is enabled on your device and that your AirPods are connected to it.
- By holding down the setup button for 10 seconds, the case can be reset. The AirPods can be connected when white light flashes.
- Clean up after the AirPod case. The charging material at the bottom of the AirPods must be connected for charging.
- Verify the battery life in your case. Before connecting to AirPods, it might need to be recharged if it is low on power.
You May Also Like:
FAQs
Can You Use Airpods When the Case is Dead?
The answer is that you can still use AirPods even without a battery in the case. But keep in mind that eventually the AirPods will need to be put in the case for charging because the battery will die.
Can Airpods Be Connected With a Charging Case?
You can definitely attach AirPods to a charging case.
To connect:
- Initially, select “settings.”‘
- then click “Bluetooth.”‘
- In front of AirPods, choose the “information” option.
- Select “forget device.”‘
In the following step, an AirPods charging case can be attached.
What to Do If You Lost An Airpod Case?
To find the lost AirPod case:
- Access the “Find my” App.
- Choose the gadgets or items tab.
- To view its location, choose the AirPod case.
- To see the map location, select “Directions.”
You can view the locations of objects or devices without a Wi-Fi connection or cellular network if “Find my Network” is enabled.
How Long Do Airpods Take to Recharge?
Complete recharging of the AirPods takes about 30 minutes.
Can Airpods Be Overcharged?
AirPods don’t overcharge, so no. They stop charging when the battery is charged to 100%.
Do Airpods Drain Phone Battery?
Yes, AirPods that are connected drain the battery of your phone. Phone batteries are used more when AirPods are connected via Bluetooth.
If My AirPods Case Dies Can I Still Track It?
GPS and cellular radios are absent from Airpods. They don’t join any networks. Once you leave bluetooth range of the device they are connected to or the battery dies, they can’t be tracked.
Do Airpods Work If the Case is Far Away?
When using your AirPods, the distance from the charging case is irrelevant. No proximity to the case is necessary at all.
Conclusion
If the AirPods have been paired with the device and have enough charge, they can be used without their cases. In addition, if one case dies, AirPods can be connected to another.
Utilize a case cover to safeguard your AirPods and take good care of them.
In order to avoid confusing your AirPods with someone else’s, this is a great way for you to identify them. To let you know that there is a mismatch, you will receive an alert if you do, though. For more Airpods issues, read our post on why are my AirPods cutting out.
Read More: How To Get Water Out Of Your Charger Port?