It is frustrating when you discover that your Toshiba Fire TV remote not working. Keep your hope alive for now! Try the nine troubleshooting methods we’ve listed below.

Most of us enjoy turning on our favorite TV shows to unwind after a long day, but when the remote is broken, it makes us feel miserable. It has been reported that many users are experiencing issues using the Toshiba Fire TV remote. They are also unable to stream media.

This guide will explain a variety of approaches to effectively resolving this problem.

Toshiba Fire TV Remote Not Working: Common Issues

Despite how sturdy Toshiba Fire TV remote controls are, all electronics occasionally experience problems. Signal interference, bad batteries, electronic interference, and other problems are among the most common ones. Several reasons are described below:

Wrong Pairing

When the remote and TV are improperly paired, it won’t respond.

Battery Complications

In most cases, this is recognized as the main offender. Your Toshiba Fire TV remote may not be working as a result of improper battery insertion, a low battery charge, or other problems that prevent the batteries from operating as they should.

Distance

Instead of using an infrared beam, your Toshiba Fire TV remote uses a Bluetooth connection. The Bluetooth connection has a 30 foot theoretical range, but in practice it is much shorter. In order to use the remote, close the distance to your TV.

Compatibility

If the replacement remote you purchase is incompatible with the Toshiba Fire TV, it will not function.

Damage

The remote’s functionality may be compromised by internal damage brought on by a specific failed component or external damage brought on by water.

Interference

Any gadget that has the ability to interfere with Bluetooth connections can also prevent your Toshiba Fire TV remote from functioning properly.

Obstructions

The remote and the Toshiba Fire TV do not need to be in direct line of sight. However, the range will be significantly reduced if there is any obstruction.

How to Fix Toshiba Fire TV Remote Not Working?

There are numerous causes of a Toshiba Fire TV remote not functioning. A broken television is the most frequent cause. Another possibility is that a broken button on your Toshiba Fire TV remote has become stuck.

So, to solve the Toshiba Fire TV remote not working issue, follow these troubleshooting steps:

Power Cycling Remote

• The remote’s batteries should be taken out. Then, press and hold the power button of the remote for 60 seconds.
• Once the full minute has passed, repeatedly press each button on the remote control. Now is the time to replace the batteries. Test it again.
• You must press the power button to remove any remaining power from the remote.

Because even when the batteries are removed, the remote still has capacitors that store some electricity. Thus, unless the capacitors are discharged, it won’t fully reset.

The remote’s capacitor will release electricity when the power button is pressed and held down. This is a very crucial step, despite how straightforward it may seem.

At first, you might also think it’s a little strange. If you simultaneously press all of the buttons on the Toshiba Fire TV remote, it might start working again.

Remote controls frequently have stuck buttons. If one or more of your remote control’s buttons become stuck, you won’t be able to use the other buttons.

A remote button can get stuck in a variety of ways as well. Because it fell between couch cushions, the rubber may have become stuck underneath the rubber.

However, it’s a fairly typical issue that is simple to resolve no matter how you look at it.

You should slam the remote several times against your hand’s palm and smash all the buttons. The buttons will then reappear.

Turn the device over so the buttons are facing down. Slap the back and let the dirt come out. Because the remote for your Toshiba Fire TV is so strong, you shouldn’t be concerned about it getting broken.

Try leaving the batteries in the remote this time if none of that worked. For 60 seconds, keep holding down the power button.

By performing this easy reset, you can probably fix your remote.

Factory Reset the Fire TV Remote

As an alternative, you might try returning the remote’s settings to factory defaults to solve the issue.

In case you’re unaware, factory reset essentially clears all the settings saved on your remote.

Instead, we’ll reset all of the remote’s settings to their original values. To successfully factory reset your remote, press and hold the left DPAD-left, back, and menu buttons for about 10 seconds.

Try Pairing the Remote Again

The problem you are having could possibly be caused by improper pairing of your remote. Re-pairing will solve this issue.

To pair the remote, hold down the Home key while pressing and releasing it. For roughly ten seconds, it can be found on the remote.

As soon as you keep holding down the button, your remote should try to pair itself.

You might need to turn the TV and remote off for a while if the remote won’t pair before attempting again.

Replace Batteries

The remote’s primary source of power is its batteries, so using it for an extended period of time can cause the batteries to deteriorate. Your remote’s batteries might also be inserted incorrectly.

The remote will automatically stop functioning in this situation. It is advised that you use new batteries for your remote in order to avoid this problem.

Confirm Remote’s IR Sensor is Working

Your TV and remote control communicate using an infrared beam. Furthermore, if this beam is malfunctioning, it could directly result in your remote not functioning.

A simple way to check whether your remote’s IR is working is to use the camera on your phone:

• Open the camera app on your phone. Take a look at your remote through the screen.
• Any button on the remote control should be pressed.
• A working remote’s button presses will cause a red light to blink on and off through the camera’s viewfinder.
• If you don’t see a red light, the remote might be broken, or the batteries might be dead.

Update TV Firmware

Update the firmware on your TV. A common cause of the problem under discussion is an outdated firmware version that limits the TV’s performance.

Remove Obstacles

A blockage between your remote and TV is a common issue. Since infrared beams are used by remote controls and TVs, they must be able to send and receive this beam without interference.

Obstacles can include a wall, other electronic signals like Bluetooth, or big items like speakers or furniture.

If you observe a blockage between your Toshiba Fire TV remote and the TV, try moving it to a different location.

Additionally, you can aim the remote at the TV’s sensor directly. The issue can be solved by making a small adjustment to the seat you sit in or by moving some accent pieces of furniture.

Make Sure the Remote IR Sensor is Working

The TV and remote both transmit and receive signals using an infrared beam. A broken remote control’s beam is a surefire sign that it is malfunctioning.

The user can confirm whether the IR sensor is functioning on the remote by utilizing the phone camera:

• Open your phone camera and view the remote through the screen.
• Press any button or a couple of buttons on the remote.
• A functioning remote will display a blinking red light visible from the camera screen with each press of the button.
• If there’s no red light visible, it means that the remote’s batteries are dead or your remote is defective.

Checking your remote’s status is simple if you follow these steps.

Contacting Support

Unfortunately, if none of the aforementioned suggestions worked for you and the problem persists, it is time to contact customer support. They will investigate and take care of the issue for you.

Any member of the customer support staff will examine your situation right away. Additionally, you’ll get a variety of troubleshooting instructions for fixing your remote. Calling (855) 527-2411 will connect you with Toshiba customer service as well.

Final Words on Toshiba Fire TV Remote Not Working:

So, to conclude, below is a round-up of the main fixes to attempt when your Toshiba Fire TV remote is not working:

• Power Cycling Remote
• Factory Reset the Fire TV Remote
• Try Pairing the Remote Again
• Replace Batteries
• Confirm Remote’s IR Sensor is Working
• Update TV firmware
• Remove Obstacles
• Make sure the remote IR sensor is working
• Contacting Support

If you tried all of the above methods but still Toshiba fire TV remote is not working then your final option is to replace the remote if you are still unable to fix it. Occasionally, the remote might be too damaged to be fixed. If that’s the situation, there isn’t much you can do about it.

Read More:

• How to Fix Samsung TV Error Code 107?
• Does Vizio Smart TV Has Bluetooth Function?

Frequently Asked Questions